Ubuntu Server: No Internet?

hi,

i have running a ubuntu server 10.04.1. I can ping my local network, but i cant get over the router. The dns entries in resolv.conf are fine. I can post any file you want. Any advice?

Thanks

netstat -rn

Ziel Router Genmask Flags MSS Fenster irtt Iface

192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0

192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1

0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0

sry, i can't make a table. don't know the syntax...

ifconfig -a

eth0 Link encap:Ethernet Hardware Adresse 00:1a:64:b6:e0:8a
inet Adresse:192.168.1.88 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21a:64ff:feb6:e08a/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:1750 errors:0 dropped:0 overruns:0 frame:0 TX packets:489 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:218740 (218.7 KB) TX bytes:215614 (215.6 KB) Interrupt:28 Speicher:92000000-92012800

eth1 Link encap:Ethernet Hardware Adresse 00:1a:64:b6:e0:8c
inet Adresse:192.168.1.90 Bcast:192.168.1.255 Maske:255.255.255.0 inet6-Adresse: fe80::21a:64ff:feb6:e08c/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metrik:1 RX packets:2203 errors:0 dropped:0 overruns:0 frame:0 TX packets:661 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:241347 (241.3 KB) TX bytes:161640 (161.6 KB) Interrupt:40 Speicher:94000000-94012800

lo Link encap:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6-Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metrik:1 RX packets:2165 errors:0 dropped:0 overruns:0 frame:0 TX packets:2165 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:977279 (977.2 KB) TX bytes:977279 (977.2 KB)

usb0 Link encap:Ethernet Hardware Adresse 02:1a:64:b6:e0:91
BROADCAST MULTICAST MTU:1500 Metrik:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

vboxnet0 Link encap:Ethernet Hardware Adresse 0a:00:27:00:00:00
BROADCAST MULTICAST MTU:1500 Metrik:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

From serverfault Tronic

• Please post netstat -rn and ifconfig -a.

  Tronic : i edited my original post, see above!

  weeheavy : I see you're running Virtualbox. Do you want to 'apt-get' from a VM or from this physical host?

  Tronic : the virtualbox is bridged with the eth1 port. i use the eth1 (physical) for apt-get!
  From weeheavy
• 1. Make sure that you can ping your router to ensure that there is a valid connection between your server and router.
  2. Check the settings on your router to ensure that it is not filtering your server traffic and that it allows connections on port 80 from your server.
  3. Ping an internet server like serverfault.com to see if you can gain access to the internet.
  4. Check your sources.list setting for apt-get to see if you have configured it correctly.
  5. If there is a transparent proxy running on your network, check to see that it is not filtering your server traffic.
  Tronic : ping router: works ping serverfault: doesn't work, the ping stucks after PING serverfault.com (69.59.196.211) 56(84) bytes of data. so no messages like "no route to host....". sources.list are standard, haven't change anything... no proxy or firewall, route is ocnfigured to NAT with port forwarding to another server (just web)
  From sybreon

• You've got 2 default routes, and it appears from your comments that only one interface is bridged with a real network, I'd suggesting getting rid of one of the routes:

  sudo /sbin/route del default eth0

  wolfgangsz : In fact, you are using the same IP address on two interfaces. Check your interface configuration. The same IP address on two interfaces will never work.
  From James Yale

• If you want two IP addresses on the same subnet you should add them on the same interface. you would have:

  eth0 eth0:0

  From Amala